If you are a happy owner of a Samsung washer, you probably already know that it has a built-in error code system. These codes are shown on the display in case of any breakdown or malfunction of the appliance. Therefore, after reading this article, you will be familiar with the meaning of all the codes, thus simplifying the diagnosis or repair of the appliance.
1E/IE Fault Code
The first one to consider is error code 1E or IE, which usually means a problem with the water supply to the appliance. The washing machine may not fill properly with water; this can be caused by a clogged inlet valve or a malfunction in the water supply system or insufficient pressure. In this case, it is necessary to straighten the hoses and ensure sufficient water supply and clean the inlet filters if they are clogged.
3E Fault Code
When the washing machine is experiencing any problems with the motor, error code 3E will appear on the display. This can be caused by a motor malfunction, wiring problems or when there is a lot of laundry in the washing machine, which puts a heavy load on the motor. First of all, we recommend restarting the washing machine by moving the load in the drum to distribute it evenly. If the error persists, check the motor and its connection for any problems or damage, if found, contact a Samsung Canada repair washer specialist.
4E/4C Fault Code
An error code such as 4E or 4C is in most cases related to a water supply problem and indicates low water flow. This can be caused by a kinked hose, closed water faucets, or a damaged inlet valve. Make sure that the water lines are not kinked, the inlet valve is in good working order and the water pressure is correct for the washing machine.
5E/5C Fault Code
If there is a drainage problem, the 5E or 5C indicator will appear on the electronic screen of your appliance. This can be caused by either a clogged drain pump filter, a kinked drain hose, or a malfunctioning drain pump. First check and possibly flush the drain pump filter, then check the drain hose for any obstructions. If you don’t find anything, move on to the pump and check it for any breakdowns and if you find any, contact a Samsung washing machine repair Toronto technician.
7E Fault code
The 7E error indicator in Samsung appliances is associated with a heating problem, mainly due to a faulty water temperature sensor or heating unit in the machine. As a consequence, the water in the washing machine does not heat up or does not maintain a sufficient temperature during certain modes or cycles. Check for problems with the sensor and heating element connection and, if necessary, switch components to restore optimal heating power.
8E Fault code
If you have noticed that your washing machine makes a lot of noise and error code 8E appears on the display, it is due to excessive vibration during spinning. The cause of vibration can be uneven distribution of laundry in the drum, which leads to noise. To correct this, distribute the laundry evenly in the drum and make sure the washer is firmly resting on the floor. Additionally, check if the appliance’s legs are loose and do not shake during operation, then securely fix them on the floor, if none of the above helps, contact a Samsung repair service washer.
9E Fault code
Typically, error code 9E indicates a low water level or problems with the water supply to the appliance due to possible clogged faucets, kinked hoses, and restricted water flow. First of all, check the hose for clogging and then go to the water valve and check its operation.
UE Fault code
If you have placed the laundry in the washing machine drum unevenly, be prepared to see the UE indicator on the display. To solve this problem, make sure that the laundry is evenly distributed in the drum before starting the wash cycle. If the problem persists afterwards, reduce the amount of laundry or select a different washing program. If nothing helps, contact a Toronto washing machine repair service center
OE Fault code
The OE error code indicates an overflow, often caused by overloading the washing machine drum during operation. Other possible causes include a faulty water inlet valve, malfunctioning water level sensor or clogged drain pipe.
SE/5E2 Fault code
The appearance of Samsung washing machine error code SE or 5E2 on the display, indicates problems in the water drainage system. The cause can be either a clogged drain pump filter, a kinked drain hose, or a malfunctioning drain pump. First, check and clean debris from the drain pump filter and hose, and then move on to the drain pump and make sure it is working.
ND Fault code
When water stays in the washing machine and cannot drain, the ND error code indicates this. This may be due to a clogged drain pump filter, improper drain pump operation, or a kinked/clogged drain hose . Inspect the filter for dirt and clean it if necessary, then check the hose for kinks or defects.
DC Fault code
DC is an error code that indicates an unbalanced load, usually caused by an uneven distribution of laundry in the drum, which affects the balancing system of the Samsung washing machine. As a solution to this problem, distribute the laundry in the drum and repeat the cycle, but if the problem persists, you can change the load size or the program used for washing.
Other Fault codes
Error codes related to various components such as the door lock assembly, the dispenser or the control panel may be displayed less frequently. In addition, for an explanation of these codes and recommendations for effective troubleshooting, refer to the user manual specific.
Conclusion
After reading this article, you already know about the main error codes of your Samsung washer and will be able to maintain its optimal performance. To easily identify the problem, apply the necessary corrective measures and ensure that your washing machine will last for a long time, study the error codes and their meanings. Also, if you keep getting error messages or are unsure how to proceed, contact support or a professional technician for advice.
